MYC Ford Ranger 2012-2021 T6 50mm Front Lowering Springs

MYC is pleased to announce our 50mm front lowering spring kit to fit the Ford Ranger T6 Sept 2012 – onwards.

THESE SPRINGS ARE SPECIAL ORDER.

These springs were produced from front shock absorber DB39-18045-GB South Africa
Coil Spring AB39-5310-ED and AB39-5310-DD measurements:
Top outer diameter edge to edge (flat bearing end) – 115mm
Bottom outer diameter edge to edge (spring seat end) – 115mm

Our springs are uprated 20% compared to the standard springs, will give a 50mm drop and are produced for all Ford Ranger T6 2.2 and 3.2 including the Wildtrak Series, manual or auto gearbox.

NOTE: If your Ford Ranger has factory fitted front lowering springs or the front springs have been changed previously by another owner and is lower than the original standard ride height we use to produce our springs then these springs will not give the 50mm drop as intended.
You must take into account the difference in drop. If this is not done the vehicle will see very little drop after fitting the new springs.
This is not a defect in the springs but a calculation error.

Ranger Springs are Special Order and are not kept in stock. Please contact us for a manufacturing lead time.